# changelog

author: Matt Westphall <westphall@wisc.edu> - 3.6.0-1
changelog:
  - Make redirector line in cache config customizable (SOFTWARE-5641)
  - check for *.local files in /etc/xrootd in authfile-updater (SOFTWARE-5597)


author: Mátyás Selmeci <mselmeci@wisc.edu> - 4.1.0-1
changelog:
  - Enable ARM builds (except for xcache-consistency-check) (SOFTWARE-6057)
  - Dummy out xcache-consistency-check on OSG 25 and newer (SOFTWARE-6054)
  - Fix makefile for EL10 (Python 3.12) support


author: Tim Theisen <tim@cs.wisc.edu> - 24.0.9-1
changelog:
  - Initial Support for Enterprise Linux 10, including the x86_64_v2 platform
  - In htcondor2, empty configuration keys are now treated as non-existent


author: Tim Theisen <tim@cs.wisc.edu> - 24.9.2-1
changelog:
  - New job attribute to report number of input files transferred by protocol
  - Optional condor_schedd history log file
  - condor_watch_q can now track DAGMan jobs when using the -clusters option
  - Fix bug that caused claim failure when previous output transfer failed
  - Fix bug where access tokens were not generated from Vault tokens


author: Tim Theisen <tim@cs.wisc.edu> - 23.0.27-1
changelog:
  - Fix bug where condor_ssh_to_job failed when EP scratch path is too long
  - Fix incorrect time reported by htcondor status for long running jobs
  - Fix bug where .job.ad, .machine.ad files were missing when LVM is in use


author: Tim Theisen <tim@cs.wisc.edu> - 24.0.10-1
changelog:
  * Mon Jul 28 2025 Tim Theisen <tim@cs.wisc.edu> - 23.10.27-1
  - Fix bug where the vacate reason was not propagated back to the user
  - HTCondor tarballs now contain Pelican 7.17.2


author: Tim Theisen <tim@cs.wisc.edu> - 24.10.2-1
changelog:
  - Remove support for old JobRouter syntax
  - New condor_dag_checker tool finds syntax and logic errors before run
  - New condor_q -hold-codes produces a summary of held jobs
  - condor_status -lvm reports current disk usage by slots on the EPs
  - Fix bug where condor_q would truncate job counts to six digits
  - Fix bug where suspended jobs did not change state to idle when vacated


author: Tim Theisen <tim@cs.wisc.edu> - 23.10.28-1
changelog:
  - Exit -code and -signal environment variables are now set for Docker jobs
  - Fix issue where ImageSize was over-reported on the Windows platform
  - HTCondor tarballs now contain Pelican 7.18.1 and Apptainer 1.4.2


author: Tim Theisen <tim@cs.wisc.edu> - 24.11.2-1
changelog:
  - Add job attributes to track why and how often a job is vacated
  - Add the ability to notify a user when their job first starts
  - Can now specify which Vault servers are trusted
  - Added htcondor2.ping() to the Python bindings


author: Tim Theisen <tim@cs.wisc.edu> - 23.10.29-1
changelog:
  - Fix flocking to pools when there are intermittent network issues
  - HTCondor tarballs now contain Pelican 7.19.3


author: Tim Theisen <tim@cs.wisc.edu> - 24.0.12-1
changelog:
  - Update condor_upgrade_check to warn about v1 Python bindings retirement
  - Update condor_upgrade_check to look for old syntax job transforms
  - All changes in 23.10.29


author: Tim Theisen <tim@cs.wisc.edu> - 24.12.4-1
changelog:
  - Add the ability to enforce memory and CPU limits on local universe jobs
  - Add the ability for condor_chirp to work within a Docker universe job
  - condor_watch_q now exits with any keyboard input
  - The shell submit keyword now works with interactive jobs
  - All changes in 24.0.12


author: Tim Theisen <tim@cs.wisc.edu> - 25.0.1-1
changelog:
  - New and improved Python bindings: classad2 and htcondor2
  - The original Python bindings have been removed


author: Tim Theisen <tim@cs.wisc.edu> - 24.0.13-1
changelog:
  - Fix bug that could cause Python job submission to crash
  - HTCondor tarballs now contain Pelican 7.20.2


author: Tim Theisen <tim@cs.wisc.edu> - 25.0.2-1
changelog:
  - Update Python file transfer plugins to use the new Python bindings
  - Fix incorrect environment when using Singularity and nested scratch


author: Tim Theisen <tim@cs.wisc.edu> - 24.0.14-1
changelog:
  - Fix problem running PyTorch jobs on multiple GPUs with
    newer versions of the CUDA library by providing long GPU IDs
    in the CUDA_VISIBLE_DEVICES environment variable


author: Tim Theisen <tim@cs.wisc.edu> - 24.12.14-1
changelog:
  - Fix interoperability problem between HTCondor-CE 24 and 25 which
    manifests as a Job Router crash when upgrading the CE to HTCondor 25
  - Fix several issues when submitting jobs with itemdata in
    the htcondor2 Python bindings
  - Fix bug when using max_idle and transfer_input_files that could result
    in the container_image to be only transferred with the first job


author: Dave Dykstra <dwd@cern.ch> - 2.12.7-2
changelog:
  - Apply pretrans transaction check to all subpackages that need to
    have their version stay in sync


author: Marco Mambelli <marcom@fnal.gov> - 3.10.8
changelog:
  - Glideinwms v3.10.8
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_10_8/history.html
  - Release candidates 3.10.8-01.rc1


author: Marco Mambelli <marcom@fnal.gov> - 3.10.9
changelog:
  - Glideinwms v3.10.9
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_10_9/history.html
  - Release candidates 3.10.9-01.rc1 to 3.10.9-03.rc3


author: Marco Mambelli <marcom@fnal.gov> - 3.10.10
changelog:
  - Glideinwms v3.10.10
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_10_10/history.html
  - Release candidates 3.10.10-01.rc1


author: Marco Mambelli <marcom@fnal.gov> - 3.10.11
changelog:
  - Glideinwms v3.10.11
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_10_11/history.html
  - Release candidates 3.10.11-01.rc1 to 3.10.11-02.rc2


author: Marco Mambelli <marcom@fnal.gov> - 3.10.12
changelog:
  - Glideinwms v3.10.12
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_10_12/history.html
  - Release candidates 3.10.12-01.rc1


author: Marco Mambelli <marcom@fnal.gov> - 3.10.13
changelog:
  - Glideinwms v3.10.13
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_10_13/history.html
  - Release candidates 3.10.13-01.rc1


author: Marco Mambelli <marcom@fnal.gov> - 3.10.14
changelog:
  - Glideinwms v3.10.14
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_10_14/history.html
  - Release candidates 3.10.14-01.rc1 to 3.10.14-02.rc2


author: Marco Mambelli <marcom@fnal.gov> - 3.10.15
changelog:
  - Glideinwms v3.10.15
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_10_15/history.html
  - Release candidates 3.10.15-01.rc1 to 3.10.15-02.rc2


author: Marco Mambelli <marcom@fnal.gov> - 3.10.16
changelog:
  - Glideinwms v3.10.16
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_10_16/history.html
  - Release candidates 3.10.16-01.rc1 to 3.10.16-02.rc2


author: Marco Mambelli <marcom@fnal.gov> - 3.10.17
changelog:
  - Glideinwms v3.10.17
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_10_17/history.html
  - Release candidates 3.10.17-01.rc1 to 3.10.17-02.rc2


author: Matt Westphall <westphall@wisc.edu.> - 2.8.5-1
changelog:
  - Log gratia probe failures to aid debugging (SOFTWARE-6037)
  - Fix NameError in post-install script (SOFTWARE-5558)


author: Tim Theisen <tim@cs.wisc.edu> - 23.0.18-1
changelog:
  - Does not pass WholeNode request expressions to non-HTCondor batch systems
  - Fix certificate subject parsing in condor_ce_host_network_check


author: Dave Dykstra <dwd@fnal.gov> 2.0-1
changelog:
  - Replace use of m2crypto and pyOpenSSL with urllib3
  - Replace use of pykerberos with gssapi
  - Use standard Requires for Python modules instead of PyInstaller
  - Add --vaultcertname option to specify an alternative certificate name.
    That used to be an additional optional meaning of the --vaultalias option,
    but urllib3 requires only one name to match.
  - Add setuptools build infrastructure
  - Refactor htgettoken script into module with entry point.
    This enables invoking htgettoken as `htgettoken.main()` from Python.
  - Use wheels to build/install Python package, which simplified the entry
    points and improves (slightly) the metadata
  - Fix the httokensh background process's check for its parent process.
    That is only a backup in case only the parent process is hard-killed,
    because normally the parent process kills the background process when
    the parent exits.
  - Use newer `sts` secrets API for token exchanges.
  - Fix the `-o`/`--outfile` option to work with relative paths. 
  - Change the `--nobearertoken` option to always get and save a vault token.


author: Dave Dykstra <dwd@fnal.gov> 2.0-2
changelog:
  - Fix broken httokendecode symlink.
  - Use python wheels to build/install on el9.  It didn't work on el8 so
    the use of wheels was removed at the last minute before the 2.0-1
    release (without removing it from the changelog like it should have).


author: Dave Dykstra <dwd@fnal.gov> 2.1-1
changelog:
  - Fix htdecodetoken to work with token files that do not end in a newline.
  - Support args in htgettoken.main() Python entry point.


author: Dave Dykstra <dwd@fnal.gov> 2.2-1
changelog:
  - Add BuildRequires python3-devel to generate correct Python metadata.
  - Remove explicit Requires for python dependencies, rely on Python metadata.
  - Always build with wheels.
  - Remove Python root logger configuration.


author: Dave Dykstra <dwd@fnal.gov> 2.4-1
changelog:
  - Add the new -s and -f options to the htdecodetoken usage summary.
  - Add a -v option to htdecodetoken to show the token source.


author: Dave Dykstra <dwd@fnal.gov> 2.5-1
changelog:
  - Add htdestroytoken -f option to force a removal of a refresh token in
    vault.
  - Add htgettoken --novaulttoken option as an alias for --noiodc, --nossh,
    and --nokerberos.
  - Again fix --showbearerurl to work in combination with --nobearertoken.
    That was fixed in 1.17 but broke in 1.21 and 2.0.
  - Fix httokensh to pay attention to htgettoken options in $HTGETTOKENOPTS.
  - Fix httokensh to correctly locate the log file if a -o or --outfile
    is given, instead of writing to ".log" in the current directory.
  - Fix httokensh to not pass on a --vaulttokenminttl option to the background
    htgettoken command, to make the vault token last as long as possible since
    it doesn't get renewed.


author: Dave Dykstra <dwd@fnal.gov> 1.16-1
changelog:
  - Add 'ratelimits' keyword to put a limit on the number of requests per
    client per interval.
  - Allow '@' to be included in the ssh plugin's keys.
  - Fix bug that prevented reconfiguration when a policy name changed.
  - Update vault-plugin-auth-jwt to 0.18.0.
  - Update vault-plugin-auth-ssh to 0.3.1.
  - Require vault to be >= 1.15.


author: Dave Dykstra <dwd@fnal.gov> 1.17-1
changelog:
  - Add a patch of PR #90 to vault-plugin-secrets-oauthapp which adds caching
    of tokens exchanged via the /sts path and adds a minimum_seconds option to
    the API.
  - Give vault tokens the capabilities of deleting secrets and revoking
    themselves.
  - Update required vault to 1.17.
  - Update vault-plugin-auth-jwt to 0.21.0.
  - Update vault-plugin-auth-ssh to 0.3.2 which includes the patch for '@' 
    that was previously applied.


author: Dave Dykstra <dwd@fnal.gov> 1.18-1
changelog:
  - Restore patch #41 on vault-plugin-secrets-oauthapp which was accidentally
    dropped.
  - Update to latest commit on vault-plugin-auth-jwt because one of the
    other patches now depends on it in order to apply cleanly.


author: Dave Dykstra <dwd@fnal.gov> 1.19-1
changelog:
  - Replace vault with openbao-2.2.0 and remove vault-plugin-secrets-jwt
    (since the builtin version works with openbao).
  - Replace vault-plugin-secrets-oauthapp with openbao-plugin-secrets-oauthapp
    3.2.0 but still install it as vault-plugins-secrets-oauthapp for upgrade
    compatibility.
  - Update vault-plugin-auth-ssh to 0.3.4.


author: Dave Dykstra <dwd@fnal.gov> 2.0.0-1
changelog:
  - Remove the external auth/oidc plugin registration to switch to the
    builtin plugin.
  - Change to semantic versioning starting at 2.0.0.  Compared to 1.18,
    the removal of the external vault-plugin-secrets-jwt plugin causes
    some incompatibility and requires a careful upgrade path in HA
    installations (that is, upgrade all vault/openbao first).


author: Dave Dykstra <dwd@fnal.gov> 2.1.0-1
changelog:
  - Update to require openbao 2.3.2, which has been updated in preparation
    for moving it to EPEL by changing the service to run under the openbao
    user and group id instead of vault.


author: Justin Hiemstra <jhiemstra@wisc.edu> - 0.0.2-1
changelog:
  - v0.0.2 release of LotMan -- adds the ability to set sqlite timeouts
    and enables WAL mode for better concurrency.


author: Mátyás Selmeci <matyas@cs.wisc.edu> - 7.9.9-1
changelog:
  - Upgrade to Pelican 7.9.9
  - Require pelican version >= service version
  - Restart service if pelican or (for xrootd-requiring services) xrootd-server is upgraded
  - Require xrootd >= 5.7.0
  - Require xrootd-multiuser


author: Mátyás Selmeci <mselmeci@wisc.edu> - 7.16.1-1
changelog:
  - Upgrade to Pelican 7.16.1 (SOFTWARE-6152)
  - Require "pelican-server" for the cache and origin (SOFTWARE-6152)


author: Mátyás Selmeci <mselmeci@wisc.edu> - 7.16.6-1
changelog:
  - Upgrade to Pelican 7.16.6 (SOFTWARE-6152)
  - Require xrootd-s3-http where available
  - Drop explicit dependency on xrootd since it is already implied by pelican-server
  - Instruct user to specify Cache.StorageLocation in cache config


author: Mátyás Selmeci <mselmeci@wisc.edu> - 25-1
changelog:
  - Replace with metapackage containing configuration for using the pelican-*.service files.
    Includes migration instructions.

  - Replace osdf-*.service files with symlinks to the corresponding pelican-*.service files;
    replace /etc/pelican/osdf-*.yaml files with symlinks to the corresponding pelican-*.yaml files


author: Mátyás Selmeci <matyas@cs.wisc.edu> 4.2.0-1
changelog:
  - Turn osg-configure-rsv into a dummy package (SOFTWARE-4511)
  - Add "queue" to OSG_ResourceCatalog for Pilot sections (SOFTWARE-5881)


author: Dave Dykstra <dwd@fnal.gov> - 3.7.0
changelog:
  - Convert osg-incommon-cert-request to use urllib3 instead of M2crypto
    for its https connection, to make it work properly on EL9.


author: Dave Dykstra <dwd@fnal.gov> - 3.7.2
changelog:
  - Fix bug in invocation of urllib3.request() in restclient's get_request();
    it was passing headers as the 4th parameter instead of identifying it
    by name.  Broke retrieval of cert with osg-incommon-cert-request in
    some cases.


author: Mátyás Selmeci <matyas@cs.wisc.edu> - 1.7.0-1
changelog:
  - Convert osg-system-profiler-viewer to Python 3
  - Add XRootD cconfig dumps (SOFTWARE-4933)
  - Print crypto policy if available (SOFTWARE-5330)
  - Fix email address in help message


author: Brian Lin <blin@cs.wisc.edu> - 0.8.1-1
changelog:
  - Add the --pw-store option to the invocation of oidc-add and add a default
    scope of blank if no scopes are configured.  These are needed for the
    CILogon issuer (SOFTWARE-4983).


author: Carl Edquist <edquist@cs.wisc.edu> - 0.8.2-1
changelog:
  - Increase renewal frequency to ensure continual validity (SOFTWARE-5137)
  - Fix password file handling for restricted permissions in setup script (#17)
  - Use newer --pw-file option for oidc-add (SOFTWARE-5050)
  - Bump version requirement for oidc-agent package (SOFTWARE-5050)


author: Dave Dykstra - 0.9.0-1
changelog:
  - Require oidc-agent-cli-5.1.0, and use a new oidc-add --skip-check option
    there to avoid trying to get an access token at load time.  This avoids
    a 'No scopes found' error when the token issuer returns different scopes
    than requested (e.g. wlcg.capabilityset which returns a set of scopes).


author: Mátyás Selmeci <matyas@cs.wisc.edu> - 23-5
changelog:
  - Log DNs of incoming certificates (SOFTWARE-5370); raise required XRootD version to 1:5.6.0 for the feature


author: Mátyás Selmeci <mselmeci@wisc.edu> - 5.8.3-1.1
changelog:
  - Update to XRootD 5.8.3 (SOFTWARE-6164)
      - Patches added:
          - 0009-Avoid-reference-beyond-end-of-table~80b938c.patch
          - 0010-XrdPfc-Ensure-a-reference-to-the-file-is-kept-when-s~aa225e2.patch
      - Patches kept:
          - 0001-Allow-hostname-used-by-XRootD-to-be-overridden-by-en~7c119b0.patch
          - 0002-XrdTls-Allow-disabling-of-X.509-client-auth~18e1c81.patch
          - 0003-XrdSciTokens-Handle-multiple-authorization-token-set~b82ddc3.patch
          - 0004-XrdHttp-Undo-HTTP-PUT-response-code-change~956b9fa.patch -> 0004-XrdHttp-Undo-HTTP-PUT-response-code-change~43ed40b.patch
          - 0006-Re-engineer-concurrency-limits-for-throttles~39fea57.patch
          - 0007-Modify-XrdThrottle-to-be-an-OSS-plugin~921fef5.patch
          - 0008-XRootD-s-xml-response-for-PROPFIND-will-now-include~aacf631.patch
      - Patches dropped:
          - 0005-XrdHttp-Fix-HTTP-protocol-errors-on-failure~4fb2221.patch
          - 0009-Fix-life-time-of-a-variable-used-for-signaling-that~286b8ca.patch
          - 0010-Correct-concurrency-and-state-tracking-around-Redriv~86d48f1.patch
          - 0011-Fix-race-conditions-around-use-of-ecMsg~803dc26.patch


author: Mátyás Selmeci <mselmeci@wisc.edu> - 5.8.4-1.1
changelog:
  - Update to XRootD 5.8.4 (SOFTWARE-6187)
      - Patches added:
      - Patches kept:
          - 0001-Allow-hostname-used-by-XRootD-to-be-overridden-by-en~7c119b0.patch -> 0001-1-Allow-hostname-used-by-XRootD-to-be-overridden-by~7c119b0.patch
          - 0002-XrdTls-Allow-disabling-of-X.509-client-auth~18e1c81.patch -> 0002-4-XrdTls-Allow-disabling-of-X.509-client-auth~18e1c81.patch
          - 0003-XrdSciTokens-Handle-multiple-authorization-token-set~b82ddc3.patch -> 0003-6-XrdSciTokens-Handle-multiple-authorization-token-s~b82ddc3.patch
          - 0004-XrdHttp-Undo-HTTP-PUT-response-code-change~43ed40b.patch -> 0004-14-XrdHttp-Undo-HTTP-PUT-response-code-change~43ed40b.patch
          - 0006-Re-engineer-concurrency-limits-for-throttles~39fea57.patch -> 0005-23-Re-engineer-concurrency-limits-for-throttles~39fea57.patch
          - 0007-Modify-XrdThrottle-to-be-an-OSS-plugin~921fef5.patch -> 0006-23-Modify-XrdThrottle-to-be-an-OSS-plugin~921fef5.patch
          - 0008-XRootD-s-xml-response-for-PROPFIND-will-now-include~aacf631.patch -> 0007-25-XRootD-s-xml-response-for-PROPFIND-will-now-inclu~aacf631.patch
          - 0011-Enable-write-through-mode-for-cache~330eac1.patch -> 0008-32-Enable-write-through-mode-for-cache~330eac1.patch
      - Patches dropped:
          - 0009-Avoid-reference-beyond-end-of-table~80b938c.patch
          - 0010-XrdPfc-Ensure-a-reference-to-the-file-is-kept-when-s~aa225e2.patch


author: Mátyás Selmeci <mselmeci@wisc.edu> - 5.8.4-1.3
changelog:
  - Add patches (SOFTWARE-6202):
      - 0009-34-Add-S3-as-a-permitted-proxy-protocol~b36d9b7.patch
      - 0010-36-Do-a-clean-TLS-shutdown-for-HTTPS~cdc53fe.patch
      - 0011-35-Make-HTTP-s-maximum-open-delay-configurable~3496b32.patch


author: Matt Westphall <westphall@wisc.edu> - 5.9.0-1.1
changelog:
  - Update to XRootD 5.9.0 (SOFTWARE-6187)
      - Patches added:
      - Patches kept:
          - 0001-1-Allow-hostname-used-by-XRootD-to-be-overridden-by~7c119b0.patch -> 0001-1-Allow-hostname-used-by-XRootD-to-be-overridden-by-~8d1252d.patch
          - 0003-6-XrdSciTokens-Handle-multiple-authorization-token-s~b82ddc3.patch -> 0002-6-XrdSciTokens-Handle-multiple-authorization-token-s~a0751f6.patch
          - 0004-14-XrdHttp-Undo-HTTP-PUT-response-code-change~43ed40b.patch -> 0003-14-XrdHttp-Undo-HTTP-PUT-response-code-change~43ed40b.patch
          - 0007-25-XRootD-s-xml-response-for-PROPFIND-will-now-inclu~aacf631.patch -> 0004-25-XRootD-s-xml-response-for-PROPFIND-will-now-inclu~aacf631.patch
          - 0008-32-Enable-write-through-mode-for-cache~330eac1.patch -> 0005-32-Enable-write-through-mode-for-cache~330eac1.patch
          - 0009-34-Add-S3-as-a-permitted-proxy-protocol~b36d9b7.patch -> 0006-34-Add-S3-as-a-permitted-proxy-protocol~b36d9b7.patch
          - 0012-37-Add-TPC-worker-pool~70720be.patch -> 0007-37-Add-TPC-worker-pool~0bcba8c.patch
      - Patches dropped:
          - 0002-4-XrdTls-Allow-disabling-of-X.509-client-auth~18e1c81.patch
          - 0005-23-Re-engineer-concurrency-limits-for-throttles~39fea57.patch
          - 0006-23-Modify-XrdThrottle-to-be-an-OSS-plugin~921fef5.patch
          - 0010-36-Do-a-clean-TLS-shutdown-for-HTTPS~cdc53fe.patch
          - 0011-35-Make-HTTP-s-maximum-open-delay-configurable~3496b32.patch


author: Mátyás Selmeci <mselmeci@wisc.edu> - 5.9.1-1.1
changelog:
  - Update to XRootD 5.9.1 (SOFTWARE-6260)
      - Patches added:
      - Patches kept:
          - 0001-1-Allow-hostname-used-by-XRootD-to-be-overridden-by-~8d1252d.patch -> 0001-1-Allow-hostname-used-by-XRootD-to-be-overridden-by~e13587e.patch
          - 0002-6-XrdSciTokens-Handle-multiple-authorization-token-s~a0751f6.patch -> 0002-6-XrdSciTokens-Handle-multiple-authorization-token-s~d8842b6.patch
          - 0003-14-XrdHttp-Undo-HTTP-PUT-response-code-change~43ed40b.patch -> 0003-14-XrdHttp-Undo-HTTP-PUT-response-code-change~73ddc83.patch
          - 0004-25-XRootD-s-xml-response-for-PROPFIND-will-now-inclu~aacf631.patch
          - 0005-32-Enable-write-through-mode-for-cache~330eac1.patch
          - 0006-34-Add-S3-as-a-permitted-proxy-protocol~b36d9b7.patch
          - 0007-37-Add-TPC-worker-pool~0bcba8c.patch -> 0007-37-Add-TPC-worker-pool~31dd3de.patch
      - Patches dropped:


author: Mátyás Selmeci <mselmeci@wisc.edu> - 138-1
changelog:
  - Add new CERN IAM endpoint for CMS (SOFTWARE-6072)
  - Remove lcg-voms2.cern.ch and voms2.cern.ch LSC files and vomses entries (SOFTWARE-6072)


author: Brian Bockelman <bbockelman@morgridge.org> 1.4.0-1
changelog:
  - Add experimental support for s3://-style URLs.
  - Delay initialization of thread pools until the first file is opened.
  - Cleanly shutdown helper threads when plugin is unloaded, reducing
    the chance of a segfault when a CLI or unit test is shutting down.
  - Fix a few minor memory leaks and race conditions uncovered by
    AddressSanitizer.


author: Brian Bockelman <bbockelman@morgridge.org> 1.5.2-1
changelog:
  - Add infrastructure for automating GitHub releases from a pushed tag
  - Automatically build as part of a release.


author: Brian Bockelman <bbockelman@morgridge.org> 1.5.5-1
changelog:
  - Fix a bug that could trigger a deadlock when a busy plugin is unable
    to continue an ongoing prefetch request.


author: Brian Bockelman <bbockelman@morgridge.org> 1.5.6-1
changelog:
  - Fix a bug that could cause the client to stop processing new requests
    if a significant number (approximately 16k) of operations have
    expired since process startup.


